© 2023 by TREND EDITOR. Proudly created with Wix.com

  • Instagram - Black Circle
  • Facebook Basic Black
  • Black YouTube Icon
Technical Support
Andy Carter
andy@ironman4x4fab.com
Phone: (704) 796-3502

 
 
Sales
Kevin Cox
kevin@ironman4x4fab.com

Track Bar System + 1 Ton UTK Steering

This is for both our full Track Bar System and 1 Ton UTK Steering Kit for your XJ or ZJ. Make sure to select all options you need to complete your setup. 

 

Track Bar System

 

Track Bar 

This is the strongest front track bar system on the market. Constructed from 1.25" high carbon (1045) steel that is cold-formed with welded and forged axle end bushing shell. We use a Barnes4wd Enduro Joint at the frame side that we TIG root weld and cover with a MIG pass for unmatched strength and penetration. The Track Bar offers 6" of 1.25x12 thread single point machined directly on bar itself. No die threading for weak threads. NO OTHER COMPANY USES THIS MUCH THREAD!

 

Track Bar Bracket

The construction of our bracket is laser-cut and CNC formed 1/4" thick 100,000 psi Domex steel. The bolt on design replaces factory bracket with no fuss using factory hardware. 2.625 bushing width to allow for a full-size Currie Johnny Joint or our adapted Enduro Joint. 9/16 x 4 grade 8 bolt for main bushing included. Angled forward for builders who push axle forward to clear larger tires yet still compatible with stock configurations.

 

Track Bar Cross Brace

The brace construction is laser-cut, and CNC formed 1/4" thick steel. The bolt on design allows for easy installation on our Track Bar Bracket. The brace reinforces the Track Bar Bracket creating second cross-member for the front of the Jeep much like our Steering Box Brace. It may need light trimming to clear larger rod ends.

 

This Track Bar system will fit 2" lift height and up, but we recommend 3". Anything below 2-3" and down will require proper bump stopping.

 

 

XJ Steering Box Brace with Sector Shaft Support

 

Our XJ Steering Box Brace with sector shaft support, braces the sector shaft and clamps the steering box. This combination allows no play to be transferred anywhere. Weak aging unibodies are prone to flex with the force of the steering box pushing against it. Our steering brace clamps the steering box, so this cannot happen. As well as a pillow block bearing grabbing the sector shaft to eliminate leverage put on the steering box. This drastically improves steering box life and eliminates 99% of nasty steering wheel play.

 

Direct bolt-on, all hardware included.
No drilling needed.
1/4" bracket laser cut and CNC formed.
No more broken or cracked unibodies from steering force!
Does not clear factory sway bar. Adapter brackets available.
100% American made.

 

Sway Bar Drop Brackets

If you are still sporting your stock sway bar, we/ have found that not all XJ sway bars are the same.  While some clear our sector shaft support bearing fine, others do not.  We have designed these 2.125" drop brackets to solve this problem.
Laser-cut and CNC formed from high strength 3/16" steel plate. 
Extended 10.9 grade hardware included.
Works with or without our steering box brace system.
Helps improve sway bar angles on lifted jeeps.
Powder-coated finish.
100% American Made.

      $595.00Price
      Choose Jeep
      1 Ton Reamer
      Additional Poly Lock-out Washer
      Add Steering Dampener Bracket
      Tapered Inserts
      Track Bar Bracket