ZJ 4 Link System Crossmember
This is a ¼” thick, A50, 6 piece cross member designed with suspension tuning in mind. With 4 lower link length locations and 4 upper link heights This system allows the suspension builder tune for low center of gravity setups for rocks or tall setups with more down force for mud. All of this benefit and it only hangs 2.25” below the chassis. This is better clearance than any other system that we are aware of! Here are some more specs on this system.
-Bolt on and weld on system for ultimate strength and rigidity. (must weld on)
-All hardware is grade 8 or higher
-Upper link mounts bolt from bottom with 12- ½” bolts per side.
-Locates entirely on the bottom of the chassis so it works with all frame stiffeners.
-Exhaust will require minor modification for clearance.
-Only sits 2.25” below chassis.
-This kit is designed for our new rear 4 link to mate up to it.
-Combined with our Adjustable Upper and Lower Links; you can adjust your anti-dive from 60% - 125%.
Expect a 30 day delay on these as demand is higher than we can currently produce without lowering quality.
These ship bare steel. Crossmembers are not powder coated as pictured.
Made 100% in the USA
Shipping will be added at checkout